A-A-50476B
f. Uniformly, continuity, size of polishing area and proximity of brush contact up to a vertical surface.
g. Resistance in ohms from the motor frame to ground connection on the plug end of the 15 meter cord is less than 1 ohm.
Contractor certification. The contractor shall certify and maintain substantiating evidence that the product offered meets the salient characteristics of this CID and that the product conforms to the producer’s own drawings, specifications, standards, and quality assurance practices and is the same product sold in the commercial marketplace. The Government reserves the right to require proof of such conformance prior to first delivery and thereafter as may be otherwise provided for under the provisions of the contract.
Inch-pound products. Products manufactured to inch-pound dimensions will be considered on an equal basis with those manufactured using metric units, provided they fall within + percent of the conversion tables contained in the latest revision of ASTM E 380, and all other requirements of this CID are met.
Regulatory requirements. The offeror/contractor is encouraged to use recovered materials in accordance with Public Law 94-580 to the maximum extent practicable.
Preservation, packing and marking. Unless otherwise specified in the contract or order, the preservation, packing, and marking shall be in accordance with ASTM D 3951.
Notes. Acquisition activity should specify the following:
1. The electrical characteristics required if other than as specified.
2. The wheel size required if other than specified.
3. When the contractor is not responsible for the inspection.
4. When a first article inspection and tests are required.
5. When preservation, packing, and marking are other than as specified.
UL Standards are available from the Underwriters Laboratories, Inc.,
333 Pfingsten Road, Northbrook, IL 60062.
ASTM Standards are available from ASTM, 1916 Race Street, Philadelphia, PA 19103.
MILITARY INTERESTS:
Custodians:
Navy- YD1
Air Force- 99
Review Activities:
Army- MD
Navy- MC
Air Force- 84
CIVIL AGENCY COORDINATING ACTIVITIES:
GSA-FSS
PREPARING ACTIVITY:
Navy- YD1
(Project 7910-0087)
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business