[METRIC]
A-A-50475B
January 3, 1994
SUPERSEDING
A-A-50475A
October 23, 1989
COMMERCIAL ITEM DESCRIPTION
POLISHER, FLOOR, ELECTRIC, DIVIDED WEIGHT
(COMMERCIAL TYPE)
This Commercial Item Description (CID) is approved by the Commissioner, Federal Supply Service, General Services Administration, for the use of all Federal agencies.
Abstract. This CID covers commercial type electric floor polishers which are used for heavy-duty wet or dry scrubbing, for polishing and buffing wood, tile, or linoleum covered floors, and for rug shampooing.
Salient characteristics.
1. Description. The polisher shall mainly consist of a frame, operating handle, wheels, scrubbing and polishing brushes, bumper, and motor. The motor of the polisher shall rest on a frame or a carriage having wheels at the rear and the brush at the front with the weight of the polisher divided between the brush and wheels. Speed shall not exceed 250 revolutions per minute while operating on a linoleum floor. The minimum weight on the brush shall be as stated in table I for the respective size of the polisher. If an additional weight is required over the brush in order to meet the pressure requirements, the weight shall be of compact design and free from projections which may interfere with satisfactory operation of the polisher in confined spaces. It shall be attached to a permanent part of the polisher. No part of the polisher and no part of the weight shall project beyond the housing. Unless the weight is built into the polisher and is out of sight in normal use, means shall be provided for readily attaching or removing the weight from the polisher without the use of special tools.
|
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Commanding Officer (Code 156), Naval Construction Battalion Center, 1000 23rd Avenue, Port Hueneme, CA 93043-4301 |
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business